Add network support to your (S)NESC with the Hakchi Wi-Fi mod! (WPA Supplicant)
Currently the only tried and tested wi-fi adapter is adapters with the Realtek 8188 chipset.
We recommend this one: TP-LINK TL-WN725N
All you need to do is:
1) Install the hmod
2) Connect your mini directly to the computer and run telnet
3) Run the command
wifi-wpa-setup and follow the instructions on screen.
Please note: (very important)
1) Your SSID must not contain spaces. When entering your SSID and wifi password do so without brackets etc.
2) When you finished running
wifi-wpa-setup you need to shut the console down and reboot with ONLY the wifi adapter connected. Once booted you may shutdown the console and reboot with everything else connected.
If you fail to follow either of the above you will have to uninstall the mod and try again.
Over time we will improve the flexibility of the mod and usability however it is what it is at the moment.
If you have any issues you can ask support at the Hakchi Resources discord
Comments are closed here.